電纜橋架安裝時的支托，是通過立柱和托臂來完成的。立柱是支撐電纜橋架的主要部件;而橋架的荷重是通過托臂傳遞給立柱的。因此立柱和托臂是電纜橋架安裝的兩個主要部件。鋁合金制電纜橋架裝置的簡稱，由鋁合金材料制作托盤或梯架的直通彎通附件以及支吊架等構成用以支承電纜具有連續剛性結構的總體裝置。

　　The support for cable bridge installation is accomplished through columns and brackets. The column is the main component supporting the cable bridge, and the load of the bridge is passed to the column through the bracket. Therefore, the column and bracket are the main components of the cable tray installation. The abbreviation for the cable bridge device of aluminum alloy is the general device for supporting the cable to have a continuous rigid structure, which is made up of aluminum alloy material making tray or the direct pass accessories of the ladder and the support and hanger.

　　此外在使用之前要對各個零部件進行檢查，只有各項指標合格才可以開機運行。 其次，在機器運行的過程中，要對機器溫度和操作規程來進行嚴格控制，若是有不穩定情況出現，應立即停機進行檢查。

　　In addition, all parts must be inspected before use. Only qualified indicators can be turned on. Secondly, in the process of machine operation, the machine temperature and operation regulations should be strictly controlled. If there is an unstable situation, the machine should be stopped to check immediately.

　　當機器運行使用的時候，應該對機器進行定期的潤滑和清潔工作，以時刻保證機器的整潔和輕便運行。 后，對機器老化的零件要及時進行更換，當不使用機器的時候要好好將其保存。

　　When the machine is running, it should lubricate and clean the machine regularly, so as to ensure the neatness and light running of the machine at all times. Finally, parts of machine aging should be replaced in time, and when they are not used, they should be kept well.

　　梯形電纜橋架直接承托電纜的部件的簡稱，由兩根縱向側邊與若干根橫檔構成的梯形部件。有孔槽形電纜橋架直接承托電纜的部件的簡稱，由帶孔眼的底板和側邊所構成的或由整塊鋁合金板沖孔后彎曲制成底部有孔的槽形部件。無孔槽形電纜橋架直接承托電纜的部件的簡稱，由底板與側邊構成的或由整塊鋁合金板彎曲制成實底的槽形部件。

　　The trapezoidal cable bridge directly supports the components of the cable, which is composed of two longitudinal parts with several lateral rungs. The abbreviation of the direct bearing cable with a slot - shaped cable bridge is made up of the bottom and side side of the hole or by the whole aluminum alloy plate which is punched through the hole to make a trough - shaped part with a hole at the bottom. The components of the non hole cable tray directly support the cable, which is made up of the bottom plate and the side edges, or the trough shaped parts bent by the whole aluminum alloy plate.

　　以上便是濟南電纜橋架今天的分享，您還滿意嗎，歡迎關注我們的網站:http://www.xinheli88.com/并且關注我們的產品，我們將為您提供優良的產品，衷心的愿與您建立合作關系。

　　The above is the Ji'nan cable bridge today to share, are you satisfied, welcome to our website: http://www.xinheli88.com/ and pay attention to our products, we will provide you with excellent products, sincerely wish to establish a cooperative relationship with you.